LCN 1260 Series

Specifications

• Standard 1260 series closer shipped with regular arm, a shaft cover, and self reaming and tapping screws
• Non-sized (1-5) cylinder is adjustable for interior doors to 4'6" and exterior doors to 3'6"
• Closer mounts hinge side, top jamb and parallel arm on either right
  or left swinging doors
• Mounts to most common commercial footprint (3/4" x 9-1/16")
• Closer meets ADA requirements
• Optional Quick Fix™ bracket kit
• Standard or optional custom powder coat finish
• Optional SRI primer for installations in corrosive conditions
• Optional Slim Line cover

Mounting Details

Customized installation templates or products may be available to solve unusual applications. See Downloads tab for general mounting instructions.

Hinge (Pull) Side:  Maximum opening to 100°: A = 6-9/16” (167 mm);
B = 12-7/16” (316 mm). Maximum opening to 101° to 120°: A = 5-9/16”
(141 mm); B = 11 7/16” (291 mm). Maximum opening to 121° to 180°: 
(frame and trim permitting) A = 3-1/16” (78 mm); B = 8-15/16” (227 mm). Hold-open points up to maximum opening with hold-open arm.

• Butt Hinges should not exceed 5” (127 mm) in width.
• Auxiliary Stop is recommended at hold-open point or where a door cannot swing 180°.
• Reveal should not exceed 3/4" (19 mm) for regular arm or 1/2"
  (13 mm) for hold-open arm.
• Top Rail less than 2-1/2" (64 mm) requires PLATE, 1260-18.
• Clearance of 2-7/8" (73 mm) behind door required for installation.

TOP JAMB (PUSH SIDE):  Maximum opening to 100°: A = 7-1/16” (179 mm);
B = 12-15/16” (329 mm). Maximum opening to 101° to 120°: A = 5-9/16”
(141 mm); B = 11-7/16” (291 mm). Maximum opening to 121° to 180°:  (frame and trim permitting) A = 3-1/16” (78 mm); B = 8-15/16” (227 mm). Hold-open points up to maximum opening with hold-open arm.

• Butt Hinges should not exceed 5" (127 mm) in width.
• Auxiliary Stop is recommended at hold-open point or where a door cannot swing 180°.
• Top Rail requires 1-3/4" (44 mm) minimum.
• 2-1/2" (64 mm) minimum with closer on PLATE 1260-18.
• Head Frame less than 1-3/4" (44 mm) requires PLATE 1260-18.
• For flush ceiling condition with 2" (51 mm) headframe, use PLATE 1260-18 (plate requires 1-3/8" (35 mm) minimum).

PARALLEL ARM (PUSH SIDE): Optional mounting requires PA SHOE 1260-62PA for REGULAR or HOLDOPEN arms. Add prefix "P" to closer description (e.g. P1260). P1260 closer includes 1260-201 FIFTH HOLE SPACER to support PA SHOE. Maximum opening – regular or hold-open arm can be templated to 100°: A = 7-3/16” (183 mm); B = 8 5/8” (219 mm). Maximum opening to 101° to 130°: A = 5-11/16” (144 mm); B = 7-1/8” (181 mm). Maximum opening to *131° to 180°:  (frame and trim permitting) A = 3 11/16” (94 mm); B =
5-1/8” (130 mm). Hold-open points up to maximum opening with hold-open arm.

• Butt Hinges should not exceed 5" (127 mm) in width.
• Auxiliary Stop is recommended at hold-open point, where a door cannot swing 180° or where CUSH-N-STOP arm is not used.
• Clearance for 1260-62PA shoe is 4" (102 mm) from door face.
• Top Rail less than 4 3/8" (111 mm) measured from the stop requires PLATE 1260-18PA.
• Stop Width minimum 1" (25 mm).
• Blade Stop clearance requires 1/2" (13 mm) BLADE STOP SPACER 1260-61.
• Auxiliary Shoe 1260-62A allows installation of regular arm with overhead holder/stop.

1260 EDA or CUSH-N-STOP: 1260 closers ordered with EDA or CUSH arms include 1260-201 FIFTH HOLE SPACER to support the shoe. Maximum opening EDA template allows 120°: Hold-open point up to maximum opening 90°: A = 4-13/16” (122 mm); B = 9-1/2” (241 mm). Maximum opening to 120°: A = 3-5/16” (84 mm); B = 8” (203 mm). CUSH arms can be templated for maximum opening/hold-open point at 85°: A = 5-5/16” (135 mm); B = 10” (254 mm). Maximum opening 90°: A = 4-11/16” (119 mm); B = 9-3/8”
(238 mm). Maximum opening 100°: A = 3 9/16” (90 mm); B = 8-1/4” (210 mm). Maximum opening 110°: A = 2-13/16” (71 mm); B = 7-1/2” (191 mm).

• Clearance for 1260-62EDA or CUSH shoe is 5-1/2" (140 mm) from
  door face.
• Head Frame flush or rabetted requires PA FLUSH PANEL ADAPTER 1260-419.
• EDA or CUSH ARM requires SHOE SUPPORT 1260-30 for fifth screw anchorage where reveal is less than 3-1/16" (78 mm).

LCN Finishes

STANDARD POWDER COATED FINISH: LCN door closers feature the finest, state-of-the-art metal finishing process available. LCN powder coating provides superior protection against the effects of weathering and is an environmentally friendly process. The high quality, chip resistant finish is far superior to any previously offered. Corrosion resistance surpasses 100 hours salt spray testing (four times the industry standard). Non-metallic components also provide the same high resistance to the effects of the elements. All LCN products must be shipped with a finish.

OPTIONAL CUSTOM POWDER COATED FINISHES: LCN offers optional custom powder coat colors to compliment special installations. This provides a custom appearance and all the corrosion resistance of standard powder coated finishes at a nominal additional cost. See Downloads tab for available custom colors.

OPTIONAL PLATED FINISHES: Visible components such as covers, arms, fasteners, and finish plates are plated to match the selected finish. Surface mounted tracks are powder coated to complement the plated finish. Hidden assemblies such as cylinders, tracks, and mounting plates are supplied with a powder coated finish.

SPECIAL RUST INHIBITING (SRI) PROCESS: For installations where a higher level of protection against weathering, or the effects of a potentially corrosive atmosphere is required, LCN offers a special rust inhibiting (SRI) process. Ferrous metal components receive an SRI pretreatment and a powder finish coat in your choice of either an LCN standard color or optional extra charge custom colors. Closers treated with the SRI process exceed the 100 hour protection level available with standard LCN powder coated finishes.